ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
Attaching The Feet & Castors
1. Press in the tabs on the latches to
release the tank lid.
2. Remove the tank lid and empty the tank
of all accessories.
3. Turn the tank upside down and
insert a castor foot into the slot on
the side of the tank.
4. Insert a screw into the hole
and tighten with a Philips head
screwdriver (not supplied).
5. Repeat steps 3 & 4 with the other 3 castor wheels.
6. Turn the tank right side up and replace the lid.
Note:
Always ensure that the latch tabs have clicked back into place
and the tank lid is securely attached.
Noise Diffuser
The diffuser can be used
for quieter operation during
vacuuming.
1. Insert the locking end onto the
blower port and turn clockwise
to lock it into place.
Attaching The Blower Strap
For easier usage, the strap can be used to carry the Blower unit on
your shoulder when it is detached from the vacuum tank.
1. Insert one end of the
mounting ring into the blower
unit and pull the other end
around the front of the unit.
2. Attach the clip on the strap to
the mounting ring. Adjust the
strap as necessary.
1. Cord Hook
2. Blower Release Button
3. Carry Handle
4. On/Off Button
5. Strap Mounting Ring
6. Concentrator Nozzle
7. Blower Port
8. Noise Diffuser
9. Blower Intake Lid
10. Floor Tool
11. Angled Nozzle
12. Castor Wheel
13. Vacuum Tank
14. Lid Latch
15. Accessory Storage Slot
16. Drain Outlet Cap
17. Vacuum Port
18. Tank Lid
19. Crevice Tool
20. Extension Tube
2-IN-1 WET & DRY VACUUM / BLOWER
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
21. 1.8m Hose
22. Foam Filter
23. Cartridge Filter & Lid
24. Blower Adaptor
a.
b.
a.
b.
2
15
16
19
18
20
17
9
1
21
22
23
24
3
7
5
6
4
14
10
8
11
12
13
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
