Powering Up The Unit
1. Press the side of the switch marked ‘I’
to turn the unit on.
2. Press the side of the switch marked ‘0’ to turn the unit off.
WARNING!
DO NOT SWITCH THE UNIT ON IN
ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES & POWDERS.
Detaching The Blower
The blower is ideal for blowing leaves, grass clippings and other
debris outdoors.
1. To detach the blower unit,
press and hold the blower
release button.
2. Lift the blower unit off the tank
lid by the carry handle.
Note:
Ensure that the power
cord is not caught on any of the
accessories.
3. To reconnect the blower, hold
down the blower release
button, lower the front end of
the unit into the cradle on the
lid and then slide the back end
of the blower unit into place.
WARNING!
ALLOW TO DRY BEFORE USE IF THE
BASE OF THE BLOWER UNIT IS DAMP WHEN YOU
DETACH IT FROM THE TANK LID.
Using The Blower
Hold the blower firmly, switch on the unit and point the jet of air in
front of you while moving forward slowly. Move the blower from side to
side with the attached tubes/nozzles several inches off the ground.
Be careful where you point the jet of air as it can move heavy material
and cause injury or damage to bystanders.
Note:
Avoid collisions with hard objects which could damage your
machine.
WARNING!
BE AWARE OF PEOPLE & ANIMALS IN
THE VICINITY OF WHERE YOU ARE OPERATING
THE BLOWER.
WARNING!
DO NOT POINT THE BLOWER NOZZLE
AT OTHER PEOPLE OR ANIMALS.
After using the blower, examine the bottom of the blower for debris
and blockages and remove if found.
WARNING!
DO NOT PLACE THE BLOWER ON THE
GROUND OR OTHER SURFACES WHILE THE UNIT
IS OPERATING AS ROCKS AND DEBRIS CAN BE
SUCKED UP, POTENTIALLY DAMAGING THE UNIT
AND BLOWING OUT ROCKS OR DUST.
WDVB-1312
5. CONTROLS
6. BLOWER FUNCTION
OPERATION
WARNING!
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, A RESIDUAL CURRENT DEVICE (RATED
30
m
A OR LESS) SHOULD BE USED.
a.
c.
b.
