background image

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household 

waste but in an environmentally friendly way. Please recycle where facilities exist. 

Check with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of 

recycled material decreases pollution in the environment. Please recycle packaging 

where facilities exist. Check with your local council authority for recycling advice.

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 
For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 
Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

DESCRIPTION OF SYMBOLS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR 

BATTERY CHARGER.

1. 

Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product 

using the battery pack.

2. 

This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk 

of fire, electric shock or electrocution.

3. 

Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive 

internal heat. Place the charger in a position away from any heat source.

4. 

To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the 

charger.

5. 

Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or 

stress.

6. 

An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk 

of fire, electric shock or electrocution.

7. 

Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it 

checked by an electrician or power tool repairer.

8. 

Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect 

reassembly may result in a risk of electric shock, electrocution or fire.

9. 

To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the 

battery pack will not reduce this risk.

10. 

Never attempt to connect 2 chargers together.

11. 

DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside 

sheds or metal buildings in summer).

12. 

The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on any 

other voltage!

13. 

The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging 

notes and procedures.

14. 

The longest life and best performance can be obtained if the battery pack is charged when the air temperature is 

between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important 

and will prevent damage to the battery pack.

15. 

Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in 

a fire.

16. 

Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immedi-

ately discontinue use and do not recharge.

17. 

During charging, the battery must be placed in a well ventilated area.

BATTERY AND CHARGER SAFETY WARNINGS

 

 

 

 

 

  

Read instruction manual

Wear eye and ear protection.

Pressure rating (millibar)

Litres

/min

L

mbar

Litres per second

l/s

•    The appliance is not intended for use by young children or infirm persons without supervision. 

Young children should be supervised to ensure they do not play with the appliance.

•    Do not leave appliance unattended when connected to the power supply. Remove battery when 

not in use and before servicing and cleaning.

•   To avoid electric shock, do not expose to rain. Store indoors.
•    Never use in the presence of explosive liquids, vapours or explosive dust – such as coal  

or grain.

•    Use only manufacturer’s recommended attachments and consumables.
•    Never modify the cleaner in any way - this is dangerous and will invalidate the warranty.
•    Do not use cleaner without the filter in place.
•    If motor sound becomes higher pitched always check for the following:
 

-  Blocked hose or accessory.

 

-  Blocked filter.

 

-  Full container.

•    When lifting the unit, always lift it with the handle or under rim of bucket. Beware of excess 

weight.

•    Children should be supervised to ensure that they do not play with the appliance.
•    The wet and dry vacuum cleaner is designed for wet and dry vacuuming using the appropriate 

filter. The appliance is not suitable for the vacuuming of combustible, explosive or harmful 

substances.

Содержание PXVWDS-1818









Отзывы: