TROUBLESHOOTING
Maintenance
• If the vacuum vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation
could lead to injury or damage.
Problem Cause
Remedy
Vacuum is not
starting
Battery is low in charge
Charge battery
Battery not inserted
properly
Insert battery pack correctly
Possible clogging
Empty the debris container and clean the
filter.
Vacuum is not
operating at
full capacity
Possible clogging
Empty the debris container and clean the
filter.
Motor
stops while
vacuuming
Battery has no power
Charge battery
Note: Ozito Industries will not be responsible for any damage or injuries caused by the
repair of the vacuum by an unauthorised person or by mishandling of the vacuum. This
tool is designed for DIY use - use in commercial or industrial environments will void the
warranty.
MAINTENANCE
Cleaning
Keep air intake clean and air vents free of debris to avoid overheating the
motor.
We recommend that you clean the equipment immediately after you use it.
Cleaning the motor housing
Clean the appliance regularly with a damp cloth. Do not use cleaning agents
or solvents; these may be aggressive to the plastic parts in the appliance.
Cleaning the tank
The tank can be cleaned with a damp cloth and some soft soap.
Cleaning the foam filter
Clean the foam filter with a little soft soap under running water and allow it
to air-dry.
Storing
Ensure the Wet & Dry Vacuum has been fully emptied of any dry matter or
liquid before it is stored.
Keep all the accessories with the unit to avoid losing them.
Keep in a dry place out of reach of children.
IMPORTANT!
BEFORE CLEANING YOUR VACUUM
OR CARRYING OUT ANY MAINTENANCE, MAKE
SURE THAT THE TOOL IS SWITCHED OFF AND
POWER SUPPLY DISCONNECTED TO PREVENT
ACCIDENTAL START-UP.
7. CLEANING & STORING
