Clayton Warthog WGP Series Скачать руководство пользователя

Страница: 1 / 22

WARNING

Respiratory protection is recommended

operating this equipment.

WARNING

Eye protection is required when operating this

equipment.

WARNING

Hearing protection is recommended when

operating this equipment.

WARNING

Read and understand operator’s manual before

using this equipment.

SAFETY LEGEND

WARNING

WGP-0

August 03, 2021

Safety – Operation – Maintenance

Keep this document in a safe place

Read and understand this manual before operating your air tool

• A HEPA Filter must be installed in this vacuum at all times.

• If this vacuum is used to collect hazardous material, appropriate personal protective equipment may be required.

• Any alteration to this equipment by a third party will nullify its warranty.

WartHog WGP Power Head

Electric Industrial HEPA Vacuum with Pneumatic Tool Sync

Models: WGP-107G-0, WGP-115G-0, WGP-205G-0, WGP-215G-0

• Designed for general cleanup, housekeeping, and vacuum sanding

• Dry Recovery Only

Scan this QR code for

online instructions and

documentation, or visit

www.ClaytonHowTo.com

WGP-0_cover

Содержание Warthog WGP Series























Результаты поиска

Содержание Warthog WGP Series

Отзывы:

Похожие инструкции для Warthog WGP Series

Бренды по названию

Популярные бренды

Clayton Warthog WGP Series, Безопасность, эксплуатация и обслуживание

Результаты поиска

Содержание Warthog WGP Series

Отзывы:

Похожие инструкции для Warthog WGP Series

Бренды по названию

Популярные бренды