4. FITTING THE FILTER
2. FITTING THE BATTERY
3. ASSEMBLY
OPERATION
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Fitting the Castors
Fitting the Motor
Fitting the Dust Bag
IMPORTANT!
NEVER USE THE VACUUM CLEANER
WITHOUT A FILTER! ALWAYS ENSURE THAT THE
FILTERS ARE PERFECTLY SECURE!
1 Turn the tank upside down and
push all 4 castors into the base
of the tank.
1 When fitting the motor to the tank,
position it so that the tank securing
clips on the motor align with the
fastening points on the tank.
1 For vacuuming fine, dry dirt it is
recommended that you fit the dust
bag.
This will ensure that the pleated
filter does not clog up so quickly
and help maintain the vacuuming
power. A dust bag is suitable for dry
vacuuming only. Using the dust bag
makes it easier to dispose of the
dust that has been collected.
2 Fasten the tank securing clips to the
tank, making sure that they lock into
place correctly.
2 To attach, slip the dust bag
over the vacuum inlet.
a
b
b
Fitting the Foam Filter -
Vacuuming Liquid
Fitting the Filter Bag -
Vacuuming Dry Matter
1 For wet-vacuuming, slip the
supplied foam filter over the filter
basket.
Note:
Do not
use the
filter
bag and/or dust bag
when
vacuuming liquid.
1 For dry vacuum cleaning always use
the filter bag. Mount the filter bag,
so that no air is sucked through the
filter cage without being filtered.
Note:
Do not
use the
foam
filter
when vacuuming dry matter.
