background image

PAGE 1 OF 27 

0521 IH-5011

1-800-295-5510

uline.com

SHOP-VAC

®

 

WET/DRY 

VACUUM

H-5011

IMPORTANT SAFETY INSTRUCTIONS

ATTENTION: Read all safety rules carefully 

before attempting to operate. Retain for future 
reference.

CAUTION: Never operate this unit when 

flammable materials or vapors are present 
because electrical devices produce arcs 

or sparks that can cause a fire or explosion. 

NEVER OPERATE UNATTENDED.

H-5011 SHOP-VAC®

The H-5011 Shop-Vac® Wet/Dry Vacuum is for 

vacuuming wet and dry nonvolatile materials. It is 

equipped with powerful, permanently lubricated 

motors and standard filtration systems. Double filtration 

is standard on Shop-Vac® commercial vacuums. The 

vacuum is equipped with an easy roll caster system. 

Automatic float shut-off prevents overflow during wet 

pick-up. The vacuum includes versatile 1½" (3.81cm) 

diameter accessories and a rugged stainless steel tank. 

UL listed.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 

OR INJURY:

1.  Do not leave appliance unattended when plugged 

in. Unplug from outlet when not in use and before 

servicing. Connect to a properly grounded outlet 

only. See Grounding Instructions on page 2.

2.  Do not expose to rain. Store indoors.

3.  Do not allow to be used as a toy. Close attention is 

necessary when used by or near children.

4.  Use only as described in these instructions. Use only 

manufacturer's recommended attachments.

5.  Do not use with damaged cord or plug. If appliance 

is not working as it should, has been dropped, 

damaged, left outdoors or dropped into water, 

contact Uline Customer Service for assistance.

6.  Do not pull or carry by cord, use cord as a handle, 

close a door on cord, pull cord around sharp edges 

or corners or run appliance over cord.

7.  Keep cord away from heated surfaces.

8.  Do not unplug by pulling on cord. To unplug, grasp 

the plug, not the cord.

9.  Do not handle plug or appliance with wet hands.

10.  Do not put any object into openings. Do not use with 

any openings blocked; keep free of dust, lint, hair 

and anything that may reduce air flow.

11.  Keep hair, loose clothing, fingers and all parts of 

body away from openings and moving parts.

12.  Do not pick up anything that is burning or smoking, 

such as cigarettes, matches or hot ashes.

13.  Do not use without dust bag and/or filters in place.

14. Turn off all controls before unplugging.

15.  Use extra care when cleaning on stairs.

16.  Do not use to pick up flammable or combustible 

liquids (such as gasoline) or use in areas where they 

may be present.

17.  Do not use as a sprayer of flammable liquids, such 

as oil-base paints, lacquers, household cleaners, etc.

18.  Do not vacuum toxic, carcinogenic, combustible or 

other hazardous materials, such as asbestos, arsenic, 

barium, beryllium, lead, pesticides or other health-

endangering materials. Specially designed units are 

available for these purposes.

19.  Do not pick up soot, cement, plaster or drywall dust 

without cartridge filter and collection filter bag in 

place. These are very fine particles that may pass 

through the foam and affect the performance of the 

motor or be exhausted back into the air. Additional 

collection filter bags are available.

20. Do not leave the cord lying on the floor after 

cleaning. It can become a tripping hazard.

21.  Use special care when emptying heavily loaded tanks.

22. To avoid spontaneous combustion, empty tank after 

each use.

Para Español, vea páginas 10-19.

Pour le français, consulter les pages 19-27.

Summary of Contents for H-5011




























Reviews: