GB
- 8 -
3. Do not use the cordless tool or the battery
charger near vapors and in
fl
ammable liquids.
4. Use the battery charger and cordless tools
only in dry conditions and an ambient tempe-
rature of 10-40°C.
5. Do not keep the battery charger in places
where the temperature is liable to reach over
40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6.
Protect batteries from overheating.
Over-
loads, over-charging and exposure to direct
sunlight will result in overheating and cell
damage. Never charge or work with batteries
which have been overheated – replace them
immediately if possible.
7.
Storage of batteries, battery chargers
and cordless tools.
Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place at
a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully
charged batteries in storage (charged at least
40%).
8. Prevent the lithium-ion battery pack from free-
zing. Battery packs which were stored below
0°C for more than 60 minutes must be dispo-
sed of.
9. When handling batteries beware of electrosta-
tic charge: Electrostatic discharges cause da-
mage of the electronic protection system and
the battery cells. Avoid electrostatic charging
and never touch the battery poles.
Rechargeable batteries and cordless electric
machines and tools contain materials that are po-
tentially harmful to the environment. Never place
any cordless electric machines or tools in your
household refuse. When cordless electric machi-
nes or tools become defective or worn, remove
the rechargeable batteries and return them to
iSC GmbH (address: Eschenstrasse 6, D-94405,
Germany). If the rechargeable batteries cannot be
removed, return the complete cordless machine
or tool.
You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and
fi
res.
Additional safety instructions
•
Always walk. Never run.
•
Always keep the ventilation opening clean.
•
Never direct the blow hole at persons or ani-
mals.
•
The machine may only be used at reasonable
times of the day, i.e. not in the early morning
or late evening when it will be a nuisance to
other people. The times specified by local au-
thorities must be observed.
•
Remove all foreign objects with a rake and
brush before starting any blowing work.
•
Where conditions are dusty, dampen the sur-
face a little or use a sprinkler attachment.
•
Use the full-length blower nozzle extension
so that the air current can work near to the
ground.
•
Watch out for children, pets, open windows
etc. and blow the foreign objects safely away
from them.
•
Warning:
This machine is not designed for
use by children.
•
Warning:
Risk of injury from rotating parts.
•
Warning:
Never use this equipment near
open windows.
Do not lose these safety instructions
Explanation of the symbols used (see Fig. 7)
1. Read the directions for use before operating
the tool.
2. Do not use the tool in rain or snow. Do not ex-
pose the tool to wet conditions.
3. Keep all other persons away from the danger
zone.
4. Wear goggles and ear mu
ff
s.
Anl_PXCJBLS_0182U_SPK7.indb 8
Anl_PXCJBLS_0182U_SPK7.indb 8
26.08.2019 05:57:12
26.08.2019 05:57:12
Содержание PXCJBLS-0182U
Страница 18: ... 18 Anl_PXCJBLS_0182U_SPK7 indb 18 Anl_PXCJBLS_0182U_SPK7 indb 18 26 08 2019 05 57 13 26 08 2019 05 57 13 ...
Страница 19: ... 19 Anl_PXCJBLS_0182U_SPK7 indb 19 Anl_PXCJBLS_0182U_SPK7 indb 19 26 08 2019 05 57 13 26 08 2019 05 57 13 ...
Страница 20: ... 20 Anl_PXCJBLS_0182U_SPK7 indb 20 Anl_PXCJBLS_0182U_SPK7 indb 20 26 08 2019 05 57 13 26 08 2019 05 57 13 ...
Страница 21: ... 21 Anl_PXCJBLS_0182U_SPK7 indb 21 Anl_PXCJBLS_0182U_SPK7 indb 21 26 08 2019 05 57 13 26 08 2019 05 57 13 ...