1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1 Throttle Safety Lock
2 Throttle Trigger
3 Priming Bulb
4 Choke Control
5 Chain Drive Cover
6 Chain Tension Screw
7 Chain Drive Cover Nuts
8 Guide Bar
9 Chain
10 Chain Brake
11 Bucking Spikes
12 Side Operating Handle
13 Recoil Starter
14 Carburettor Adjustment Screws
15 Filter Cover Knob
16 Filter Cover
17 Fuel Tank Cap
18 Chain Bar Oil Cap
19 On/Off Switch
1. FUEL
• Only use oil that is expressly labelled for use with air-cooled 2-stroke engines.
• Use unleaded petrol with a minimum octane rating of 89.
WARNING!:
PETROL IS VERY FLAMMABLE. AVOID
SMOKING OR CAUSING ANY SPARKS OR FLAMES
NEAR FUEL. MAKE SURE THAT YOU STOP THE MOTOR
AND ALLOW IT TO COOL BEFORE REFUELLING THE
CHAINSAW. SELECT AN OPEN OUTDOOR AREA FOR
FUELLING AND MOVE AT LEAST 3M AWAY FROM THE
FUELLING POINT BEFORE STARTING THE MOTOR.
PETROL CHAINSAW
500ml
Regular
Unleaded
1. Fill with unleaded petrol up to
fuel line.
2. Add 2-stroke oil up to oil line.
3. Shake vigorously for a
thorough mix.
4. Remove
YELLOW
fuel tank
cap and fill the fuel tank to
about 80% of its capacity with
the fuel mix.
Fuel tank capacity: 310ml
5. Fasten the fuel tank cap and
clean any spillage.
