RISK OF EXPLOSION OR FIRE
What can happen:
• Spilled petrol and its vapours can become ignited from cigarette sparks, electrical
arcing, exhaust gases and hot engine components such as the muffler.
• Heat will expand fuel in the tank which could result in a fire.
• Operating the tool in an explosive environment could result in a fire.
• Muffler exhaust heat can damage painted surfaces, melt any materials sensitive
to heat (such as siding plastic, rubber or vinyl) and damage live plants. Keep hot tool
away from other objects.
• Improperly stored fuel could lead to accidental ignition. Fuel improperly secured
could get into the hands of children or other unqualified persons.
How to prevent it:
• Shut off engine and allow it to cool before adding fuel to the tank.
• Use care when filling the tank to avoid spilling fuel. Move tool away from fuelling
area before starting engine.
• Keep maximum fuel level 20mm below top of tank to allow for expansion.
• Operate and refuel in well ventilated areas free from obstructions.
• Store fuel in a approved container (AS/NZS 2906-1999) for petrol. Store in a secure
location away from the work area. Make sure the container is clearly marked “fuel”.
RISK TO BREATHING
What can happen
:
• Breathing exhaust fumes can cause serious injury or death.How to prevent it:
How to prevent it:
• Operate tool in a well ventilated area. Avoid enclosed areas.
• Never operate unit in a location occupied by other people or animals.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate petrol tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a petrol tool.
Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a petrol tool.
Do not use a power tool while you are tired or under the influence of
drugs, alcohol, or medication. Amoment of inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as a
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Remove any adjusting key or wrench before turning the tool on.
A wrench or a
key that is left attached to a rotating part of the petrol tool may result in personal injury.
d) Do not overreach. Keep proper footing and balance at all times.
This enables
better control of the petrol tool in unexpected situations.
e) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
f) If devices are provided for the connection of dust extraction and collection
facilities ensure that these are connected and properly used.
Use of these devices
can reduce dust-related hazards.
3) Petrol tool use and care
a) Do not force the petrol tool. Use the correct petrol tool for your application.
The correct petrol tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the petrol tool if the switch does not turn it on and off.
Any petrol
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Turn tool off completely before making any adjustments, changing
accessories, or storing petrol tools.
Such preventive safety measures reduce
the risk of starting the petrol tool accidentally.hair can be caught in moving parts.
d) Store idle petrol tools out of the reach of children and do not allow persons
unfamiliar with the petrol tool or these instructions to operate the petrol tool.
Petrol tools are dangerous in the hands of untrained users.
e) Maintain petrol tools. Check for misalignment or binding of moving parts,
breakage of parts and
any other condition that may affect the petrol tool’s operation.
If damaged, have
the petrol tool repaired before use. Many accidents are caused by poorly maintained
petrol tools.
f) Keep utting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the petrol tool, accessories and tool bits etc., In accordance with these
instructions and in the manner intended for the particular type of petrol tool,
taking into account the working conditions and the work to be performed.
Use
of the petrol tool for operations different from intended could result in a hazardous
situation.
h) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
i) Children should be supervised to ensure that they do not play with the
appliance.
4) Service
a) Have your petrol tool serviced by a qualified repair personnel using only
identical replacement parts.
This will ensure that the safety of the petrol tool is
maintained.
SAFETY INSTRUCTIONS
ADDITIONAL SAFETY INSTRUCTIONS FOR
CHAINSAWS
Note: For safety reasons the chainsaw is shipped with the chain brake fully
engaged. This brake must be released before the saw becomes operational.
Never cut into the ground.
Never cut into wire fences.
Never cut into samplings.
Never cut into prepared wood.
Use the chainsaw to cut only wood.
It is advisable to provide a support for the chainsaw when cutting branches. Do not cut using the bar
point and beware of branches under tension.
Children under 18 must not use chainsaws.
Keep people away from the chainsaw when in use.
Check the following conditions before beginning work:
• There should be no people in the felling area.
• Make sure there is a second person within calling distance.
• The working area should be free from obstacles.
Wear suitable clothes which do not hinder movement.
Use specific protection during operations involving head, hands, feet, eyes and ears. It is
recommended the use of a helmet with a visor during felling, branch cutting
and chopping operations.
Wear gloves with an external protection when using the chainsaw. Use ear protection to prevent
hearing injuries.
Wear safety boots when using the chainsaw.
During transport the brake must be applied to avoid accidental start-up.
Do not use the chainsaw in rainy or windy conditions or in poor light.
Find a suitable position before beginning work.
When working on slopes, the saw operator must stand beside or above the wood to cut, i.e. felled
trees.
Use the chainsaw holding it firmly with both hands.
Make a wedge-shaped cut before felling the tree, then the felling cut leaving a hinge for the felling
direction.
Beware of any falling branches after felling operations.
Beware of wood splinters when cutting chopped wood.
Ensure your chainsaw is suitable for the job.
Never work above shoulder level or reach out to cut a branch: ensure you have stable footing at all
times.
Do not operate in a hazardous location. Such areas include where there is a risk of explosion of
petrol fumes, leaking gas or explosive dust.
Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous
concentrations.
Protect your tool. This chainsaw is NOT WEATHERPROOF and should not be exposedto direct
sunlight, high ambient temperatures, damp, wet or high humidity conditions for prolonged periods of
time.
Take care not to spill fuel. When refuelling the chainsaw ensure that the motor has been switched off.
Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine
running.
Be careful where you store the chainsaw. Store the tool in a dry area away from flammable liquids.
Keep your distance. The chainsaw emits exhaust fumes. Ensure bystanders keep a safe distance.
Operating instructions and instructions for common cutting tasks, including the use of personal
protection equipment are covered in this manual. This product has a need for adequate training which
is covered in this manual.
Do not operate this machine while tired, ill or under the influence of alcohol or other drugs.
Ensure that you mix 35 parts unleaded fuel to 1 part 2-stroke oil. If not, the engine will overheat and
cause damage to your chainsaw.
Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not
smoke when filling fuel tank.
DANGER! BEWARE OF KICKBACK!
Warning!
Kickback can lead to dangerous loss of control of the chainsaw and
result in serious or fatal injury to the operator or to anyone standing close by. Always be alert.
Rotational kickback and pinch kickback are major chainsaw operational dangers and the leading cause
of most accidents.
Kickback may occur when the tip of the guide bar touches an object, or when the wood closes in and
pinches the saw chain.
If the bar tip or point contacts, it can produce a rapid reverse reaction, kicking the guide bar up and
back towards the operator. This is known as rotational kickback.
Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the
operator. This is known as pinch kickback.
Either of these reactions can cause loss of control of the saw, resulting in serious personal injury.
Do not rely exclusively on the safety devices built into your saw. Take the following steps to help avoid
accident or injury:
Reduce the element of surprise by understanding what causes kickback.
Keep a firm grip on the chainsaw using both hands, the right hand on the rear handle and the left hand
on the front handle when the motor is running. A firm grip will help maintain control. Do not let go whilst
the motor is running.
Make sure that the area of operation is free of obstructions. Do not let the point of the guide bar contact
a log, branch or any other object.
Use high speeds when cutting.
Do not overreach or cut above shoulder height.
Carefully follow the sharpening and maintenance instructions given in this manual.
Use only replacement bars and chains specified by the manufacturer.
