background image

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original date of 

purchase 

and is

 

intended for DIY (Do It Yourself) use only.

 

If a product is defective 

it will be replaced in accordance with the terms of this warranty. Warranty excludes 
consumable parts, for example: engraving tip, stencils, etc.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage otherthan that specified on the 

tool.

•   If the tool shows signs of damage or defects caused by or resulting from abuse, 

accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

•  Professional, industrial or high frequency use.

EGR-2050

ELECTRIC ENGRAVER

15W

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE 

PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS 

REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY 
PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486 
New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE 

REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS 

YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and 
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to 
a replacement or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and the failure does 
not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under this 
warranty, however, where you have suffered any additional direct loss as a result of a 
defective product you may be able to claim such expenses by contacting our 
customer service helpline above.

OZITO

 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0716

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 

 

230-240V ~ 50Hz

Power: 

 

15W (S2: 30min)

No Load Speed: 

6,000/min

Accessory Diameter:  3mm

WHAT’S IN THE BOX

Electric Engraver

Stencil x 2 and Hex Key

ozito.com.au

Содержание EGR-2050







Отзывы:

Похожие инструкции для EGR-2050