2. ON/OFF SWITCH
OPERATION
The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less.
The stroke adjustment controls the stroke length and in turn the
engraving depth.
2. Set stroke adjustment dial to
desired setting.
3. STROKE ADJUSTMENT DIAL
1. Turn the stroke adjustment
dial so that the marker
points to desired setting.
2. For a fine mark, set the
stroke adjustment dial to
lower settings.
3. For a deeper, thicker mark,
set the stroke adjustment
dial to a higher settings.
To turn on, push the
on/off switch down to
“I” position.
To turn off, push the
on/off switch up to
“O” position.
