background image

 

ENGRAVER SAFETY WARNINGS

 

GENERAL POWER TOOL SAFETY WARNINGS

 

ELECTRICAL SAFETY

WARNING!

 

Read all safety warnings and all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious injury. 

 

Save all warnings and instructions for future reference. The term “power tool” in the warnings 

refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety 

a.  

 Keep work area clean and well lit

. Cluttered or dark areas invite accidents. 

b.  

 Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, 

gases or dust.

 Power tools create sparks which may ignite the dust or fumes. 

c.  

 Keep children and bystanders away while operating a power tool.

 Distractions can cause you to lose 

control.

2. Electrical safety 

a.  

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools.

 Unmodified plugs and matching outlets will reduce risk of 

electric shock. 

b.    

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded. 

c.    

Do not expose power tools to rain or wet conditions.

 Water entering a power tool will increase the risk of 

electric shock. 

d.  

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving parts.

 Damaged or entangled cords increase the risk of 

electric shock. 

e.    

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk of electric shock. 

f.  

 If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) 

protected supply.

 Use of an RCD reduces the risk of electric shock. 

3. Personal safety 

a.  

 Stay alert, watch what you are doing and use common sense when operating a power tool. Do not 

use a power tool while you are tired or under the influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in serious personal injury. 

b.  

Use personal protective equipment. Always wear eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 

personal injuries. 

c.  

 Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on invites accidents. 

d.    

Remove any adjusting key or wrench before turning the power tool on.

 A wrench or a key left attached 

to a rotating part of the power tool may result in personal injury. 

e.    

Do not overreach. Keep proper footing and balance at all times.

 This enables better control of the power 

tool in unexpected situations. 

f.  

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewellery or long hair can be caught in moving parts.

g.    

If devices are provided for the connection of dust extraction and collection facilities, ensure these 

are connected and properly used.

 Use of dust collection can reduce dust-related hazards.

4. Power tool use and care 

a.  

 Do not force the power tool. Use the correct power tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was designed. 

b.    

Do not use the power tool if the switch does not turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be repaired. 

c.  

 Disconnect the plug from the power source and/or the battery pack from the power tool before 

making any adjustments, changing accessories, or storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power tool accidentally. 

d.    

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the 

power tool or these instructions to operate the power tool.

 Power tools are dangerous in the hands of 

untrained users. 

e.    

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly maintained power tools. 

f.  

 Keep cutting tools sharp and clean.

 Properly maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control. 

g.    

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into 

account the working conditions and the work to be performed. 

Use of the power tool for operations 

different from those intended could result in a hazardous situation. 

5. Service 

a.  

 Have your power tool serviced by a qualified repair person using only identical replacement parts. 

This will ensure that the safety of the power tool is maintained.   

WARNING! 

●  Always wear eye, eay and breathing protection.
●  Do not apply too much pressure when engraving.

WARNING! 

The use of an accessory or attachment, other than those recommended in this Instruction 

Manual, may present a risk of personal injury.
To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating 

instructions to be found in the Manual. All persons who use and service the machine have to be accquainted 

with this Manual and must be informed aboiut its potential hazards. Children and infirmed people must not use 

this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is 

also imperative that you observe the accident prevention regulations in force in your area. The same applies for 

general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such 

changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following 

hazards may arise in connection with the tool’s construction and design:

●  Damage to the lungs if an effective dust mask is not worn.
●  Damage to hearing if effective earmuffs are not worn.
●  Damage to eyes if effective googles are not worn.
●  Risk of injury unless hands are kept well clear of cutting devices.

Содержание EGR-2050







Отзывы:

Похожие инструкции для EGR-2050