Oz-View Wireless video intercom, Техническое руководство

Страница: 9 / 20

Oz-View Technical Manual V1.02 - 1
st
Jan 2011 9
successful and the call station and handset monitor have successfully paired;
at this time, the outdoor call station will create 3 sounds “Di Di Di”. If the
handset
Monitor shows the letters "failed" within 8S, then it means that the coding is
failed and the outdoor station will have no response.
Note: After successful coding, then the outdoor camera and handset monitor
are the 1st outdoor camera and 1st handset monitor respectively; if coding is
failed, you should do the coding again.
Receive code
(Only required when adding one more call station or one more handset
monitor.)
Adding one more handset monitor:
1).Press the “ ” and “ ” buttons at the same time, when the 1st handset
monitor is in ON status until the screen shows “transmit code”, then release
the buttons and enter the “transmit code” status.
2).On the additional handset(2nd) after “transmit code” is displayed on the 1st
handset, press the “ ” and “ ” buttons at the same time on the 2nd
handset when it is in ON status until the screen shows “receive code”, then
release the buttons and enter the “receive code” status, then press the “ ”
button at this time in 2nd handset monitor. If it shows “success” on the handset,
it means that the coding has been successful.
Adding one more outdoor call station:
1).Press the “ ” and “ ” buttons when the handset is in the ON status until
the screen shows “transmit code”, then release the buttons and enter the
“transmit code”status.
2).Then press and hold the call button in outdoor call station until you hear the
two “Di Di” tones. Then release the call button in outdoor call station (Do not
release until you hear the two Di Di tones). Then press the “ ” button in the
handset at this time. If it shows “success” on the handset, the coding has been
successful.
Note: After coding the 2nd call station, you should press the call button on the
2nd call station to call handset monitor to confirm and identify the ID. of the
2nd call station.
Adding one more outdoor call station and one more handset monitor:
1).Press the “ ” and “ ” button when the 1st handset monitor is in ON
status until the screen shows “transmit code”, then release the buttons and
enter the “transmit code” status.
2.Then press the “ ” and “ ” buttons at the same time when the 2nd
handset monitor is in ON status until the screen shows “receive code”, then
release the buttons and enter the “receive code” status. Press the “ ” button