Oz-View Wireless video intercom, Техническое руководство

Страница: 11 / 20

Oz-View Technical Manual V1.02 - 1
st
Jan 2011 11
Adjusting brightness
There are 6 levels for brightness adjustment
Press the “ ” button when the handset monitor is in “talking” status or
surveillance function (For details, please kindly refer to the BASIC OPERATION
and SURVEILLANCE), then the brightness level will become higher. At this time,
it will show “Val 0i” on the handset monitor (“ i ” is to indicate the brightness
level). When the brightness is adjusted up to maximum level, if you press this
button again, then it will be invalid.
Press the “ ” button when the handset monitor is in “talking” status or
surveillance status, then the brightness level will become lower. At this time,
it will show “Val 0i” on the handset monitor (“ i ” is to indicate the brightness
level). When the brightness is adjusted to minimum level, if you press this
button again, then it will be invalid.
Surveillance
One to one intercom:
1).Press the “ ” button when the handset monitor is in standby status, then
the screen will display “monitoring”.
2).If the outdoor call station receives a signal within 1S, then it will display the
outdoor station; if not receiving the signal within 4S, then it will auto-exit the
monitor status.
3).In monitor status, press the “ ” button again, and then it will exit the
monitoring of outdoor call station. The monitor time is 60S. After 60S, it will
auto-exit the monitor status.
One to two or two to two system:
1).Press the “ ” button when the handset monitor is in standby status, then it
will monitor the 1st outdoor station (It will display “monitoring 01”); press this
“ ” button again, then it will monitor the 2nd outdoor station (It will display
“monitoring 02”); press the “ ” button in third time, it will auto-exit the
monitoring status.
2).If receiving a signal within 1S, then it will monitor the outdoor station; if not
receiving the signal within 4S, then it will auto-exit the monitor status.
3).In standby status, press the “ ” button to start or end the monitoring of
outdoor stations. After 60S, it will auto-exit the status.
Basic operation
One to one intercom:
1).In standby status, when a visitor presses the call button on call station, then
the power indicator will still light.
2).a. If not receiving a response signal within 4S, then it will sound “Di Di Di Di”,