Oz-View Wireless video intercom, Техническое руководство

Страница: 14 / 20

Oz-View Technical Manual V1.02 - 1
st
Jan 2011 14
without any operations, and then it will auto-exit the status.
If not doing any operations after entering the initialization status, then it will not
delete the previous cards records.
Note: If you lose the
【
【 【
【
management cards
】
】 】
】
or
【
【 【
【
shadow cards
】
】 】
】
, please do
the above operation to initialize and then re-add the
【
【 【
【
users' cards
】
】 】
】
, Please
kindly make the good marks on all the cards to differentiate.
Add user cards: Which is used to add the user card.
Add cards procedure: In standby status, contact
【
Add-cards
】
, then it will
buzz twice and the green indicator will flash. In add card status, the operation
procedure as followings: contact
【
Shadow cards 1
】
→
【
User cards 1
】
, then
shadow cards and user cards correspondingly, until up to
【
Shadow cards 20
】
→
【
User cards 20
】
, please mark them well on the shadow cards and user
cards .During this period, if you contact the add cards again, and then it will
auto-exit the status.
Note: You can only add the cards in the name of adding cards and shadow
cards which had been authorized in initialization status.
Delete user cards: which is used to delete the user cards.
Delete cards procedure: In standby status, contact the
【
Delete cards
】
,
then it will buzz once and the red indicator will flash. In delete-card status, the
operation procedure as followings: Contact
【
shadow cards
】
(that is
corresponding to the user cards), then it will delete the user cards. During this
period, if you contact the delete cards again, and then it will auto-exit the status.
Note: After deleting the user cards, then you should re-add the new user
cards according to the section of ADD USER CARDS.
Cards unlocking: In standby status, contact the valid user cards, then it will
unlock the doors.
Note: Only the valid user cards can unlock the doors, it indicated that it
will buzz twice and the green indicator will flash twice. If it is the invalid
cards, then it will buzz once and the red indicator will flash once.
Unlocking time setting
1).The 1st unlocking time is 1.8S (In default status, this is the 1st unlocking
method). With power disconnected from the call station, press and hold the call
button in outdoor call station, at this time connect the power to call station, when
the unit sounds a single “Di” tone, release the call button and the unlocking time
will now be set at 1.8 seconds.
2).The 2nd unlocking time is 4S. With power disconnected, press and hold the
call button on call station, and connect power to this call station. When you hear
two “Di Di” tones, release the call button and the unlocking period will be set at
4 seconds.
3). The 3rd unlocking time is 8S. With power disconnected, press and hold the
call button on call station, and connect power to the call station. When you hear
three “Di Di Di” tones, release the call button and the unlocking period will be