Oz-View Wireless video intercom, Техническое руководство

Страница: 13 / 20

Oz-View Technical Manual V1.02 - 1
st
Jan 2011 13
“talking”.
2).a. If there is no response signal with 4S from called handset monitor, after 4
“Di Di Di Di” tones, the handset will exit the call status and return to standby
status.
b. If receiving a response signal with 4S from the called handset monitor,
then the calling handset monitor will play the selected ring tone, then the called
handset will display “talking” and play its selected ring tone. The indicator light
will remain lit.
3). a. If no one answers the call from called handset monitor, the call will last
60S and enter to the standby status.
b. If some one answers the call from called handset monitor, then it will stop
playing the ring tone and enter the “Talking” status (the indicators in both
handset monitors will turn from red to green and remain lit), the talk time is
120S.
c. Meanwhile, if pressing the “ ” button in calling handset monitor, then it
will end the call and enter into the standby status.
4).In the process of paging, the user can press the “ ” button again in any
handset monitors to end the communication, then it will enter the standby status
after hearing two “Du Du”.
Note: If the handset monitor is short of power, then it will indicate the user to
charge the battery in handset monitor.
Night-vision operation
1). When the handset is in talking status, press the “ ” button to activate the
night-vision of outdoor camera.
2). When the handset is in surveillance status, press the “ ” button to
activate the night-vision of outdoor camera.
RFID card-reader operation:
It is used to register two management cards (one is to add cards, one is to
delete cards), 20pcs user cards and 20pcs shadow cards; being compatible
with EM4001;
Initialization: Which is used to set 2pcs management cards (one is to add cards,
one is to delete cards) and 20pcs shadow cards (The exact cards depend on
the client’s request, maximum 20pcs users' cards).
Initialization procedure: Press the Initialization button within the battery
cover, then it will buzz and the red indicator will flash. In initialization status, the
operation procedures as followings: contact
【
Add cards
】
→
【
Delete cards
】
→
【
Shadow cards 1
】 【
Shadow cards 20
】
,then all the user cards will be deleted.
During this period, if you press the initialization button again or wait for 30S