Rev.0 LEPTON
Service
manual
OXYGEN S.p.A.
14
DRIVE & BATTERY CHARGER NI-ZN BATTERIES VERSION
Figure 5 / a
REMOVING THE DRIVE
•
Open the battery compartment, remove the bar (4 – Figure 7). Remove the
plastic protection of the battery pack , disconnect the POSITIVE pole (7 –
Figura 5/a) from the batteries. NOTE: there is a temperature sensor mounting to
an aluminum bar connect with the POSITIVE pole (22 – Figure 5/a). Taking
care to remove the sensor.
•
Remove the helmet storage compartment, carefully disconnecting the battery
recharger plug (17 - Figure 5/a) and the connector of the rear light system (19 -
Figure 5/a);
•
Cut all the self-blocking bands;
