5.Advanced User Guidebook
Figure 5-64 wave of Vamp cursor measurement
Carry out the following operation steps for the Freq cursor measurement:
1.
Press
Cursor
and recall the Cursor Measure menu.
2.
Press the
H1
button, the
Type
menu will display at the right of the screen. Press
the
F3
button to select
Freq
for
Type
, with two purple dotted lines displayed
along the vertical direction of the screen indicating the corresponding Cursor 1
and Cursor 2.
3.
According to the measured waveform, adjust the positions of Cursor1 and
Cursor2 by turning the
VERTICAL POSITION
knob
of CH1 and CH2.
Increment window shows two cursors difference value and the present position
(see
Figure 5-65
).
72
