5.Advanced User Guidebook
Figure 5-37 Wave Saving
Tip:
Whatever the
Type
of save menu is set, you can save the waveform by just pressing
the
Copy
panel button in any user interface. If the
Storage
of the save menu is set as
"
External
", you should install the USB disk. Please refer to the contents below to
install the USB disk and name the file to be saved.
Save the current screen image:
The screen image can only be stored in USB disk, so you should connect a USB disk
with the instrument.
1.
Install the USB disk
: Insert the USB disk into the "1.
USB Host port
" of
"
Figure 4-3 Right side panel
". If an icon
appears on the top right of the
screen, the USB disk is installed successfully. The supported format of the USB
disk: FAT32 file system, cluster size cannot exceed 4K. Once the USB disk
cannot be recognized, you could format it into the supported format and try again.
2.
After the USB disk is installed, press the
Save
panel button, the save menu is
displayed at the bottom of the screen.
3.
Press the
H1
button, the
Type
menu will display at the left of screen, turn the
M
knob to choose
Image
for Type.
4.
Press the
H4
button, the input keyboard used to edit the file name will pop up.
The default name is current system date. Turn the
M
knob to choose the keys;
press the
M
knob to input the chosen key. The length of file name is up to 25
characters. Choose and press the
Enter
key of the keyboard to end the input and
store the file with the current name.
51