Page 43 of 61
OPERATOR’S MANUAL • Owandy-RX DC • 02/2020 • NXDCEN160A
Operator’s manual – Owandy-RX DC
SUGGESTED MAINTENANCE
10.1. SUGGESTED MAINTENANCE
In order to guarantee safety of the radiographic system, it is necessary to set up a maintenance schedule.
The RESPONSIBLE ORGANISATION is responsible for planning and observing a maintenance schedule which must
be executed by qualifi ed technicians who must be able to certify their work with a “Conformity Declaration”.
CAUTION
Run an inspection on the radiographic system and on its operation when it is installed and every twelve months.
Once a year, lubricate the pins and bushes of the wall plate and the positioning arm, as specifi ed in the INSTALLATION
& MAINTENANCE MANUAL.
!
WARNING
Do not lose the adjustment key that comes with the system, since, in time, it could become necessary to make read-
justments.
!
WARNING
If the parts should become hard to move or should squeak, call the “Assistance Service”.
10.2. CLEANING THE OUTER SURFACES
Clean the external surface using a damp cloth and non-corrosive non oil-based detergent and disinfect it using a non-
aggressive medical detergent.
Do not spray detergent or disinfectant directly on the device.
The spacer cone may be cleaned with cotton wool soaked with surgical alcohol.
CAUTION
• Turn off and disconnect the device from the supply mains before carrying out cleaning operations.
• Do not spray products directly on the device. Apply the product on a clean cloth.
• Always use disposable protective covers for the applied parts.
• Do not use UV systems to disinfect the equipment, as exposed parts of the device can turn yellow or discolour.
• To avoid any potential hazard or danger to operators and patients, contact your authorized Owandy Radiology Technical Representative imme-
diately if you experience any unusual operation, mechanical issues, or equipment malfunction.
