20
Product Specification and Flow Chart
Model Name
OHC-7000D Tankless POU Water Dispenser
Dimension
182mm(W) x 509mm(D) x 403mm(H)
Net weight
9.2kg
Input voltage
220-240V(AC) 50/60Hz
Total filtration
1,200L
Heating type
Instant heating
Cooling type
Direct Chilling
Power consumption
Cooling 0.3A Heating 2,600W
Cold temperature
4 ~ 12℃
Hot temperature
80 ~ 90℃
Temperature control
Electrical sensing and control
Purpose of use
Water supply filtration
Application
Residential, SOHO
Environment
Water pressure
zzzz
Incoming water
temperature
5 ~ 35℃
Specification
Flow Chart
Filter Head
Heat Sink
Instant Heater
Chilling Tank
Faucet
Tap water
Pressure regulator
(3kgf/cm2)
Tap Water
Shut-off V/V
Elec. Sterilization Module
Flow senser
Flow control motor
and inlet temp. senser
Hot Water V/V
Cold Water V/V
Drain
Room Water V/V
Chilling tank
inlet valve
Drain
3way V/V
※ Effective filtration - It is intended to identify the life of contaminants removal devices such as filters built into the product, meaning the effective
filtration calculated as the removal rate of chloroform, etc.
※ The conents of this instruction manual (Exterior design and specifications) are subject to change without notice to improve the quality of the product.
※ Manufacturer : OVIO Corporation : 76, Cheongwonsandan 2-Gil, Mado-myeon, Hwaseong-si, Gyeonggi-do 18543, Rep. of Korea. (+82-31-357-7075)
