14
Function setting and reset
Faucet UV-C sterilization
Auto-flushing
Electrolytic sterilization
LED brightness adjustment
Switching the default water temperature
Faucet sterilization works by pushing the front moving nozzle into the product.
Press and hold the cold water button and the warm water button simultaneously for more than 6
seconds to adjust the brightness of the various indicator lamps in two steps.
If the cold water button and the room water buttons are pressed at the same time for more than 3
seconds, the cold water is set to room water. To change back to cold water, press the cold water and
the room water button at the same time for at least 3 seconds.
When installing the product for the first time, connect the power cord and the dispense button will
blink and drain about 3L of water.
After replacing the filter, press and hold the dispense button for about 6 seconds.
After connecting the power, sterilization function is activated for about 10 minutes every 72 hours automatically. In the
electrolytic sterilization operation, the front sterilizing lamp of the water inlet flickers and it is not possible to dispense water.
During flushing, press the dispense button for more than 3 seconds to stop.
Electrolysis sterilization is activated manually by pressing the room water button and the warm water
button simultaneously for more than 3 seconds.
1
1
1
1
1
2
2
