12
Use when you want to dispence warm water.
When the hot water lock LED turned on, the warm water select button LED turn off.
You can not drink water at this time, please use it after unlocking.
Use when you want to dispense water after selecting the type of water you want to take.
Use when you want to dispense hot water.
If the hot water lock LED is turned on, the hot water will not dispense.
Press the hot water button for more than 3 seconds to unlock it.
Lights when the warm/hot water lock function is on.
The corresponding amount of water is turned on and shows the selected volume of water.
Touch the amount of water selection button to select the desired volume of water.
120ml → 250ml → 550ml → continuous is selected.
If you tap the volume of water button for 3 seconds or more, the default volume of
water will be changed from 120ml to 250ml.
If you press again for more than 3 seconds, you can return the 120ml default volume or water setting.
Warm(Approximately 40℃) water selection button
Dispense button
Hot water selection button
Lock Lamp
Volume of water dispense Lamp
4
7
5
8
6
Control Panel & Display