11
Control Panel & Display
1
6
7
8
2
3
4
5
Use when you want to dispense cold water.
Press and hold for more than 3 seconds to turn off cold water function.
Press and hold again for about 3 seconds to activate the cold water function. Water
type unselected, cold water selection is the default state.
Use when you want to dispense room water.
If the room water is not used for more than 5 seconds, the selection will be
changed to cold water.
Cold water selection button
Room water selection button
Each time the button is pressed, it is set in order of 120ml → 250ml → 550ml → continuous.
Select the desired amount of water and press the button for more than 6 seconds to
fix the volume of water. However, for safety, 550ml and continuous can not be set default
The Volume of water selection button
1
2
3
Control Panel & Display
