Overview Hydra 3000 Uno, Техническое руководство

Страница: 8 / 74

Hydra 3000 Uno Technical Manual
Doc Part No.: OVZ20041 © Overview Ltd. 2020 Page 8 of 74
Revision: 01 This is the property of Overview Ltd. No copying without permission.
A wiper is fitted that may be remotely controlled to clear water from the viewing window of the
camera.
A version fitted with an LED illuminator is available. It consists of a set of white and infra-red
LEDs that are powered and controlled from within the PTZ unit. The lights are controlled
automatically to provide optimum illumination adjusted to the zoom distance of the camera.
Manual selection of white lighting is available via the control menus.
Specification Value
Ingress Protection IP67 (To BS EN 60529)
Housing Construction Die-cast aluminium
Window Toughened glass
Housing Finish Three stage paint system. Finish, powder coat to required
colour. Tested to EN60068-2-52.
Weight (with LED illuminator) 6.9 kg
Weight (without illuminator) 6.6 kg
Dimensions See Figure 4 & 5
Mounting flange 4 x 10mm diameter bolt holes on 4” (102mm) PCD
Maximum operating
temperature 60°C (Continuous)
Minimum operating
temperature -30°C Non-icing conditions
Wind loading 100 mph (no damage), 70 mph fully controlled operation
Wiper Fitted as standard (integrated control)
Bearings Ball bearings for pan and tilt
Pan movement 360° continuous
Tilt movement 360° continuous but limited to 180 degrees in software
Housing impact resistance Tested to EN62262 – IK10
Vibration resistance Tested to EN60068-2-6
Shock resistance Tested to EN60068-2-27
Electromagnetic compatibility Tested to EN50130-4, EN55032 (Class A)
7.2. Electrical Features
The PTZ Unit must be connected to an approved Power Supply Unit (PSU) which converts mains
electricity to the 48V DC required to run the PTZ unit. The PSU should be rated for the maximum
power required at all operating temperatures of the PTZ to avoid damage to the PTZ unit or
overloading of the PSU. An EMC suppression unit should be fitted in the power supply lines to
maintain EMC compliance.
Power Specification Value
Power Supply Voltage 46-50 Volts DC
PTZ Input Power required in varying conditions:
Camera static, no lights, no wiper, tour on.
Camera static, lights on, no wiper, tour on.
Camera zooming, Lights on, Wiper on, Motors full load.
Recommended PSU min output power at max temp.
5-10 Watts
15-22 Watts
96 Watts*
100 watts