Overview Hydra 3000 Uno, Техническое руководство

Страница: 5 / 74

Hydra 3000 Uno Technical Manual
Doc Part No.: OVZ20041 © Overview Ltd. 2020 Page 5 of 74
Revision: 01 This is the property of Overview Ltd. No copying without permission.
3. Safety
THIS CAMERA SYSTEM MUST BE INSTALLED, OPERATED AND MAINTAINED IN ACCORDANCE WITH
THE MANUFAC TURER’S INSTRUCTIONS.
1) Please study this Technical Manual thoroughly before installing, maintaining, or using the
camera system.
2) Do not drop the PTZ camera unit.
3) The PTZ camera unit should only be connected, using the cable supplied, to an approved
power supply.
4) Ensure power is disconnected and locked off before installing or maintaining the system.
5) Do not mate the connectors to the unit with power on the connectors.
6) Installation of this system should be carried out by suitably trained and qualified technicians
in accordance with local electrical codes.
7) To prevent the risk of shock do not expose the camera unmated connectors to water before
or during installation.
8) Do not drop or shake the carton severely.
9)
Do not touch the viewing windows as this may result in a blurred picture.
10) Do not clean the viewing windows with any abrasive material.
11)
Do not turn the camera to face the sun directly as this may damage the camera imager.
12) Do not install or use the camera in an environment of extreme temperatures. See Product
Specification Section of this Manual for limitations.
13) Do not disassemble any part of this system with the power on.
14) This camera system is not suitable for the following environments:
a. Explosive atmospheres
b. Life critical systems
c. Safety critical systems
15) The camera system should be installed where it cannot be tampered with by unauthorised
personnel.
16) The camera system components should be securely fastened to a structure of sufficient
strength to support them. Allowance should be made for additional loads caused by local
wind effects.
17) For PTZ units fitted with an illuminator DO NOT look directly at the lights when power is on.
NOTE: The infra-red lights are dangerous at distances of less than 2 metres but are not
visible to the naked eye.
18) PTZ units fitted with an illuminator should not be installed or used in such a way that the
lights may dazzle people, especially those driving vehicles.
When shipping the camera by air it should only be carried in a pressurized hold as it is a
sealed system.