25
“Multidis SFQ”
Transport and storage
140485280-V02.08.2019
EN
4.1 Ball valve
Illust. 7: Dimensions ball valve
Item no.
Size
D
L1
L2
1406383
DN 20 G ¾
55 mm 57 mm
1406384
DN 25 G 1
80 mm 60 mm
1406483
(with
thermometer)
DN 20 G ¾
73 mm 60 mm
1406583
(with
thermometer)
DN 20 G ¾
73 mm 60 mm
1406484
(with
thermometer)
DN 25 G 1
85 mm 60 mm
1406584
(with
thermometer)
DN 25 G 1
85 mm 60 mm
- The ball valves 1406483 and
1406484 have a red T-handle
identifying the supply pipe.
- The ball valves 1406583 and
1406584 have a blue T-handle
identifying the return pipe.
The length with installed ball valve is
obtained by adding the length of the
stainless steel distributor/collector
“Multidis SFQ” (L) and the length of
the ball valve (L1).
4.2 Heat meter
Standard heat meters G 1 and G ¾ can be
installed.
The dimensions of the heat meter
can be obtained from the heat meter
manual.
5. Transport and storage
The stainless steel distributor/collector has to
be transported in the original packaging.
The stainless steel distributor/collector must
only be stored under the following conditions:
Temperature
range
-20°C up to +60°C
Max. relative
humidity of air
95%
Particles
Dry and free from dust
Mechanical
influences
Protected from
mechanical agitation
Radiation
Protected from UV-rays
and direct sunlight
Chemical
influences
Not together with
solvents, chemicals,
acids, fuels and similar
6. Installation
The brackets allow for the fixing of the
distributor/collector onto the wall or in the
cabinet.
1.
Mount the flow distributor (at the top) and
the return collector (at the bottom) into the
sound-absorbing brackets.
2. Fix it onto the wall or in the cabinet.
The supply and return pipe can be
connected from either the left or right
hand side.
