Oval EL0137, Инструкция по эксплуатации

Страница: 23 / 38

E-126-3-E
23
● Push Ⓐ .
● The program indicator starts flashing.
● Select / input a value using Ⓑ or Ⓒ .
● To check the value / selection, push Ⓒ .
● To change a value, select a digit using and increase the value
using .
PROG
SELECT
PROG
CLEAR
PROG
CLEAR
SELECT
When a parameter is changed, ▲ and ▶ indicate the transition direction of value or digit etc.
Even after the data is changed, the change is not reflected until is pushed. If 20 seconds or more elapses
without pushing or keep pressing it for three seconds, the change will be cancelled.
NOTE: The change of parameter is reflected after is pressed.
If you press for three seconds or do not press any optical switch for
two minutes, the mode will automatically return to the measurement mode.
10.5 To return to the measurement mode
PROG
PROG
PROG
10.4 To change or select a value