Speed of white paper feed [1]
The default value is 5.
Choose a value between 1 and 8 whereas 8 stands for maximum paper
movement speed. We recommend the default value 5.
Note:
Using very thin paper you should reduce the paper movement speed.
Setup [2]
•
Manual
Tear
(standard)
Set this radiobutton if you want to tear off the label manually.
•
Peeler
(optional)
Set this radiobutton if the label will be peeled off the strap automatically
(You need to install an optional label dispender.)
•
Automatic Cutter (optional)
Set this radiobutton if the label will be cut off automatically (You need to
install an optional Automatic Cutter.)
Sensor Settings [3]
•
None Sensor/Cut Sheet Paper
Set this radiobutton if sensor should be deactivated and the label roll has
no gap and/or continous labels/media is used.
•
Gap
Set this radiobutton if the form feed is regulated by the gap between the
labels.
•
Black Mark Paper-Back
Set this radiobutton if the form feed is regulated by the black mark on the
paper-back.
Setup “CALIBRATE GAP/BLACK MARK SENSING” [4]
The driver software calibrates the sensor GAP-/BLACK MARK on the label
and label carrier. Thereafter the sensor can measure the gap between the
19
