The Outlaws’ Guide to the Marantz AV7005
Input Setup
In this last section, we will define which digital and analog connections the AV7005 uses
with the different
Inputs
available to it. From this point forward, an
Input
refers to one of
the ten inputs listed on the Connection Summary Sheet: BD, DVD, VCR, SAT, GAME,
AUX1, TV, CD, CD-R, and PHONO. If we refer to any of the cables plugged into the
AV7005, we will identify them as
connections
. The screen shot below shows six of the
twelve possible menu options, but the specific options listed will vary depending on
which input is active.
Input Setup Menu
There are twelve possible sub-menus under
Input Setup
, depending on which input is
selected. Many of them relate to the radio tuner, such as
Auto Preset
,
Preset Skip
,
Parental Lock
,
Antenna Aiming
, and
Preset Name
. We will discuss those sub-menus
and the
Rename
, Source
Level
,
Playback Mode
, and
Still Picture
sub-menus in the
Roadmap to the Setup Menu later in this guide.
Our first stop upon entering the
Input Setup
menu is the
Input Assign
sub-menu. In this
menu, you can select video and audio inputs for seven different inputs and audio inputs
for three inputs. You will want to refer to the Connection Summary Sheet on page 18
when adjusting this menu. For each of the first seven inputs (BD, DVD, VCR, SAT,
GAME, AUX1, and TV), each of the three columns (HDMI, Digital, and Comp) can be
adjusted. The Digital column can be adjusted for the CD input, CD-R input, and SIRIUS
tuner input.
Each of the three columns in the
Input Assign
sub-menu relates to either an audio or
video connection. Use the navigation controls on the remote control or front panel to
highlight an entry in the table, press the “ENTER” button to select that entry, and use
the
◄
and
►
buttons to scroll through available options for that entry. Press “ENTER”
again to save the selected setting.
24
_
Marantz AV7005
Quick Setup Guide
