The Outlaws’ Guide to the Marantz AV7005
Quick Setup Guide
Both the Marantz User Manual for the AV7005 and the “Roadmap to the Setup Menus”
section of this Guide provide detailed descriptions of the unit’s menus and how to
configure them. This section will walk you through the basic settings required to quickly
setup the AV7005 and provide an introduction to the processor’s menus.
Before entering the AV7005’s setup menu, please take a moment to familiarize yourself
with the remote control ands the buttons shown below. The main remote has an LCD
screen at the top. Directly below that are the power buttons, while the other controls you
will need for navigating the setup menus are located near the middle of the remote.
These controls are also available on the front panel.
Menu Navigation
Controls – Remote
Menu Navigation
Controls – Front Panel
Button Function
On
Switches the unit from Standby to On.
Standby
Switches the unit from On to Standby.
AMP
Sets the remote to control the AV7005.
Menu
Activates the setup menu. When in the setup menu, this button will
exit the menu.
Up / Down
Use
▲
and
▼
to scroll through menu entries.
Left / Right
Use
◄
and
►
to adjust settings for the highlighted entry.
Enter
Select the highlighted item. Necessary for entering sub-menus,
adjusting some settings, and accepting an option for those settings.
Return
Return to the previous menu screen.
Start by turning on your video display and setting it to the input that is connected to the
AV7005’s monitor output (as discussed on pages 6 through 8 and noted in the
Connections Summary Sheet on page 18). Then press the “AMP” button so the remote
will operate the AV7005 and press “ON” to turn on the AV7005. You can now navigate
the menus on your video display using the buttons listed above. The menus also appear
on the front panel, one line at a time. The first menu that appears on screen will be the
Main Menu.
Quick Setup Guide
Marantz AV7005
19
_
