54.
Attaching the
Decorative Front Gable
is next.
Screw 90 degree Simpson Strong Ties up into third
batten of roof panel with 2 - 3 /4” screws flush to end of
batten (see pictures).
Place the Decorative Front Gable underneath porch
roof so peaks line up. Lift up underneath until seams
meet. Mount with 2 - 3/4” screws into each Strong Tie.
Attach 2 - 90
degree Simpson
Strong Ties, one
on each side of
gable.
53
. Position Porch Veneer with best face exposed, flush with front Rafter and Ridge Board. When
correctly in place, nail veneer to rafters with 12 finishing nails. Complete both sides.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20
37”
Wide