Outboards F2.5, Руководство пользователя

Страница: 50 / 194

Operation
45
6. After the engine starts, slowly return the
manual starter handle to the original po-
sition before releasing it.
7. Slowly return the throttle grip to the fully
closed position.
TIP:

When the engine is cold, it needs to be
warmed up. For further information, see
page 47.

If the engine does not start on the first try,
repeat the procedure. If the engine fails to
start after 4 or 5 tries, open the throttle a
small amount (between 1/8 and 1/4) and try
again. Also if the engine is warm and fails to
start, open the throttle a same amount and
try to start the engine again. If the engine
still fails to start, see page 82.
Procedure for starting outboard motor (
F4
,
F5 F6
)
1. Move the gear shift lever to the neutral
position.
2. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then, install the clip on the other
end of the cord to the engine shut-off
switch.
3. Align the engine start mark “ ” on the
throttle grip with the notch in the tiller
handle.
1. Neutral position
1. Start mark “ ”
2. Notch
1
1 2
U6BV74E0.book Page 45 Tuesday, December 10, 2013 1:10 PM