9
Select the device whose points are to be imported to M-Link.
Points are transferred as follows:
Create a template for the M-Link device and add the device to Ounet (see page 4).
Select the device and its point where you want to read
the source field point. Drag and drop the point to the “Tar-
get” field.
If you select “synchronize”, you can both read and alter
the device point (you can alter the value of the point from
either device).
Select the “Point bindings” tab
Select “Bus points”
Select the device whose point data is to be read.
Select the point you want to read.
Drag and drop the point to the “Source” field.
