10
The Info view shows all information on M-Link and the Ouman controller connected to the M-Link via the C connector
Info
Setting
Description
M-Link
Extension bus in use
Information on the status of device connection of the M-Link-compatible device connected to Oulink’s C
connector.
Time NTP sync in use
You can choose whether the clock will be synchronised with the time server. When this selection is made,
the clock of the Ouman device connected in the C connector will also be updated.
NTP server
The time server to which the time is synchronised.
2nd NTP server
Secondary time server, used if connection to the primary time server is lost.
Current time
The device reads the time from the server. The time and calendar details of the controller connected to M-
Link via a C connector will also be updated from the server.
Time zone UTC offset
The current time zone. Finland’s time zone is +2:00.
DST in use
If you select “DST in use”, the device will automatically switch between winter time and daylight saving
time according to the calendar.
Controller
Ouman device connected to an Ouman device via a C connector
Controller version
Device platform version of the Ouman device
Controller application
version
Software version of the control application of the Ouman device
M-Link’s web user interface
Log into the browser view (see p. 2).
DST= Daylight saving time. This selection activates
the winter time / daylight saving time calendar.
If an Ouman device is connected to the C connec-
tor, select “Extension bus in use”. Then M-Link’s
INT/ERR signal lamp will tell the status of the
connection between M-Link and the M-Link-
compatible device.
