Otto Bock Juvo, Инструкция по эксплуатации

Страница: 31 / 124

Joystick
The speed and driving direction in a driving profile (e.g. "Drive") are controlled with the joystick (see Page 46).
If the control unit is in "Seating" mode, the seat option can be adjusted by moving the joystick forwards/backwards
(see Page 66) or switched to the next seat option by moving it left/right.
You can navigate within the operating modes (e.g. "Bluetooth Devices" mode) by moving the joystick for­
wards/backwards or right/left.
[Direction indicator left – on/off] button; [Direction indicator right – on/off] button
Pressing these buttons activates/deactivates the respective front and rear direction indicators.
If the power wheelchair is not fitted with lights for road traffic, this button is deactivated (no function).
[On/off] button
Pressing this button turns the power wheelchair on or off (see Page 45). In combination with additional operating
steps, it also activates/deactivates the drive-away lock (see Page 48).
[Lights on/off] button
The front and rear lights are activated/deactivated by pressing this button.
If the power wheelchair is not fitted with lights for road traffic, this button is deactivated (no function).
[Warning flashers on/off] button
All 4 warning flashers are activated or deactivated when this button is pressed.
If the power wheelchair is not fitted with lights for road traffic, this button is deactivated (no function).
[Profile/mode] button
Pressing this button retrieves the available driving profiles and operating modes of the control system in succes­
sion (dependent on programming and connected devices).
The system first switches from one driving profile to the next driving profile (e.g. "Drive"; "Speciality Control"; ...;
"No Assist"; "Attendant"). The number of driving profiles is dependent on programming. After reaching the last
driving profile, you can switch to the operating modes by pressing the button again.
The programmed operating modes are now toggled through ("Seating"; "Bluetooth Devices"; "IR Menu"; "I/O
Module"). The number of operating modes is dependent on programming. The joystick is used to navigate within
the operating modes (see above). After reaching the last mode, you can switch back to the first driving profile,
"Drive", by pressing the button again.
LCD display for profiles (selection) – TEN° control panel
Display Information
"Drive" profile
Standard driving profile for the TEN° control panel. Among other things, the number
of speed levels and the acceleration values are defined here.
If there are special requirements for use, other driving profiles can be saved in the
control unit.
"No Assist" profile
The driving profile is only enabled for control units with an electronic track stabiliser
(gyro). For safety reasons, the user must activate this profile when travelling in
means of transportation as the electronic track stabiliser is disrupted by the move­
ment of means of transportation (bus; train; ship).
"Attendant" profile
This profile enables operation of an attendant control. The profile image appears
automatically on the LCD screen when the attendant control is activated by the
attendant.
31 Juvo
Use