Otto Bock Juvo, Инструкция по эксплуатации

Страница: 46 / 124

WARNING
Defective safety functions
Falling, tipping over, collision with persons or nearby objects due to lack of inspection
► Before every use, ensure that the product and its safety functions are in safe and proper condition.
►
Only use the product if all safety functions, e.g. the automatic brakes, are functional.
INFORMATION
In dangerous situations, the product can be turned off at any time using the on/off button. When the button is
pressed, the product brakes immediately and the electrical functions cease. Malfunctions such as an insufficient
supply of power to the controls are recognised by the software, triggering an emergency stop or reducing the
speed of the product. A warning signal will also sound.
• Pressing the [On/Off] button (see Page 25) turns the power wheelchair control device on or off. The power
wheelchair turns off automatically if the control device has not been used for an extended period of time.
• The power wheelchair brakes automatically and comes to a stop if it is turned off with the [On/Off] button while
being driven.
• Each time you switch on the control device, it will be at the previously selected speed level.
• Pressing the [On/off] button (see Page 25) turns the power wheelchair control unit on or off. The power wheel­
chair turns off automatically if the control unit has not been used for an extended period of time.
• The power wheelchair brakes automatically and comes to a stop if it is turned off with the [On/off] button while
being driven.
• Each time you switch on the control unit, it will return by default to the last driving profile used (e.g. "Drive") or
to the last mode used (e.g. "Seating").
• The specialist dealer can use the parameter settings to specify the default driving profile or mode of the power
wheelchair after it is turned on according to the user's requirements (e.g. in "Drive" profile).
6.7.4 Selecting the speed levels
• The power wheelchair has a programmable number of speed levels (delivery condition = 5 speed levels).
• Pressing the [Decrease Speed] button lowers the speed level.
• Pressing the [Increase Speed] button raises the speed level.
• The pitch of the audible signal changes once the highest or lowest speed level is reached.
• The [Selected speed level] LED display shows the speed level selected.
Display Information
Selected speed level = 3
• The power wheelchair has a programmable number of speed levels (delivery condition = 5 speed levels).
• Turning the rotary multi-selector to the right [Increase speed] increases the speed level.
• Turning the rotary multi-selector to the left [Decrease speed] reduces the speed level.
• The pitch of the audible signal changes once the highest or lowest speed level is reached.
• The LCD screen indicates the selected speed level in the driving profile "Drive":
Display Information
Selected speed level = 2 (TEN° control panel)
6.7.5 Driving
WARNING
Driving on unsuitable surfaces
Risk of falling or tipping over due to operator error
► Do not operate the power wheelchair on very smooth surfaces (e.g. icy surfaces) or very rough surfaces
(e.g. gravel or rubble).
46
Use
Juvo