Otto Bock C2000 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 72

background image

Replacing the LED rear light (including rear direction indicator)

The rear LED light is maintenance-free. If repairs are required, the qualified person who fitted the wheelchair can
help.

9.2.2 Replacing a battery

Batteries may only be replaced by authorised personnel.

9.3 Troubleshooting

CAUTION

Risk of uncontrolled driving behaviour

Falling, tipping, collision with persons or nearby objects due to defects

►

If any faults, defects or other hazards that can lead to personal injury are detected, the product must be taken
out of service immediately.

►

Contact your authorised specialist dealer if uncontrolled movement of the product occurs due to a malfunc
tion.

INFORMATION

In the event of communication problems in the control unit bus system, the system triggers an emergency stop in
order to prevent any uncontrolled functions.

►

Note that after every emergency stop, you have to turn the power wheelchair control unit on again.

►

If the driving function is still not available after turning the control unit on again, activate pushing mode by
releasing the brake.

►

Inform the qualified personnel immediately.

Faults are indicated on the control panel LCD screen, on the LCD monitor (if installed) or on the attendant control
(if installed). The following table shows the individual notifications as well as the associated fault sources and pos
sible causes and measures.
If the measures described here do not resolve the faults completely, contact your specialist dealer. The specialist
dealer is able to read the exact error codes with a handheld programming device and can perform a targeted sys
tem analysis.
The control unit stores a list of all faults that occur. The specialist dealer reads this information, for example during
a general overhaul of the power wheelchair. Based on the saved data, the specialist dealer determines future ser
vice and maintenance intervals.

9.3.1 Types of notifications

Warning

A warning indicates a status or malfunction of one or several components of the power wheelchair. The function of
components without errors is not restricted.
For example, if the connection between the control unit and seat motor is faulty, this error will only be indicated if
the user attempts to activate the motor. However, the driving function is still available.

Error

An error affects one or several functions of the power wheelchair. The power wheelchair and its functions are not
fully operational until the fault is resolved.

9.3.2 Wheelchair control unit error overview

Display symbol

LCD monitor
display

Error/warning

Cause

Possible measure

Controller temperature
warning

Overheating

due

to

excessive load

Cool down phase

Motor

temperature

warning

Overheating

due

to

excessive load

Cool down phase

62 | Ottobock

Maintenance and repair

C2000

«
...
60
61
62
63
64
...
»

Содержание C2000









































































Отзывы:

Нет отзывов

Похожие инструкции для C2000

Бренд: Zippie Страницы: 60

Бренд: AAT Страницы: 44

Бренд: Pandhora Страницы: 72

Motion Concepts Ultra Low Maxx

Бренд: Invacare Страницы: 100

Бренд: Invacare Страницы: 44

Бренд: CareCo Страницы: 11

HIPPOCAMPE LEISURE

Бренд: VIPAMAT Страницы: 11

Бренд: VIPAMAT Страницы: 12

Бренд: ROHO Страницы: 10

AGILITY AG-LATFX-L-FL

Бренд: ROHO Страницы: 18

Бренд: Vermeiren Страницы: 3

Бренд: Vermeiren Страницы: 16

Бренд: Vermeiren Страницы: 16

Бренд: Stylus Страницы: 24

Бренд: Handicare Страницы: 12

Бренд: Karma Страницы: 52

Бренд: Winco Страницы: 12

Бренд: Drive DeVilbiss Healthcare Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды