Otto Bock C2000, Инструкция по эксплуатации

Страница: 18 / 72

7.3.5 Adjusting the footrest and calf pad
The footrest height can be adapted to the requirements of the user. The height adjustment depends on the lower
leg length of the user.
7
Adjusting the lower leg length
1) Using a size 13 open-end or combination wrench
and a size 6 Allen wrench, loosen the two screws in
the mounting holes and remove them.
2) Slide the receiver with the footrest up or down
along the rail.
3) Insert the screws into the mounting holes and
retighten them.
The calf pads are part of the standard equipment for the power wheelchair. They are mounted on the rails for the
attachment of the footrests. Their position can be adapted to the requirements of the user.
8
Adjusting the calf pad
1) Using a size 13 open-end or combination wrench
loosen the two screws on the mounting sheet and
remove them.
2) Move the receiver with the calf pad up or down
along the rail.
3) To change the depth setting, another hole further
forward or backward in the mounting sheet can be
selected.
4) Insert the screws into the mounting holes and
retighten them.
7.3.6 Adjusting the control panel position
INFORMATION
By default, the control panel is mounted on the side specified in the order. It can also be mounted on the other
side of the power wheelchair later on if the user so desires. Please contact the qualified personnel who delivered
the product to you.
The depth position of the control panel is subsequently adjustable.
9
Adjusting the position to the forearm length
1) Loosen the 3 set screws on the bottom of the arm­
rest.
2) Slide the rail with the control panel forwards or
backwards.
INFORMATION: If the control panel rail is too
long it can be shortened. Please contact the
qualified personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the arm­
rest.
18 | Ottobock
Settings
C2000