Otto Bock C2000, Инструкция по эксплуатации

Страница: 37 / 72

22
Charging process via external charging receptacle
1) Turn the control unit on the power wheelchair off.
2) Plug the charging plug of the battery charger into
the charging receptacle on the power wheelchair.
3) Connect the battery charger to the mains socket
and turn it on.
→
Charging starts automatically.
→
The battery charge level is indicated by the LCD
screen on the control panel and by the LEDs on
the battery charger.
4) Turn the battery charger off and pull the mains plug
when the charging process is complete.
5) Disconnect the charging plug from the charging
receptacle.
6) Switch on the control unit. The power wheelchair is
ready to use.
8.11 Power seat functions
The power wheelchair can be equipped with a range of different optional power seat functions.
For more information on the specific equipment of this power wheelchair, contact the qualified personnel.
8.11.1 Safety instructions
WARNING
Driving with power seat functions
Risk of falling or tipping over due to operator error
► Only drive in road traffic and on inclines and downgrades with the seat tilt and seat height adjustments
lowered and with a vertical backrest. Always use a belt system.
► Slightly tilt the seat to the rear when driving down obstacles in a forward direction (e.g. curbs) and reduce the
speed.
►
Drive with the seat raised or with the seat tilt/back angle adjustment activated only for short distances at
home. Always use the speed level 1 for this. Note that the field of vision is limited when driving. Always use a
belt system.
►
Use the seat height adjustment and the seat tilt only on firm, level ground.
WARNING
Overloading
Risk of falling, tipping over due to non-compliance with technical data
►
Note that the maximum permitted load of the power wheelchair may be reduced when using power seat func­
tions (see the section "Technical data").
CAUTION
Exposed pinch points
Pinching, crushing of limbs (e.g. fingers) due to lack of caution in danger areas, damage to the product
►
Note that when seat functions are used, inherent pinch and shear points are located between the seat frame
and the power wheelchair frame.
►
Ensure that no body parts, such as hands or feet, are in the danger area while the seat functions are used.
► Ensure that no interfering objects, such as clothing or other obstacles, are in the danger area while the seat
functions are used.
CAUTION
Overloading of the actuators
Risk of falling, tipping, pinching, crushing of limbs due to improper handling
► Avoid overloading the actuators. Overloading may cause components to break, leading to uncontrolled drop­
ping of the seat or causing the backrest to flip back.
Ottobock | 37 C2000
Use