Otto Bock C2000, Инструкция по эксплуатации

Страница: 31 / 72

• Pressing the [On/Off] button (see the section "Control panel") turns the power wheelchair control unit on or
off. The power wheelchair turns off automatically if the control unit has not been used for an extended period of
time.
• The power wheelchair brakes automatically and comes to a stop if it is turned off with the [On/Off] button while
being driven.
• Every time you switch on the control unit, it will be at the speed level which was selected last.
• The specialist dealer can use the parameter settings to specify the default speed level or default menu of the
power wheelchair after it is turned on according to the user's requirements.
8.8.4 Selecting the speed levels
• The power wheelchair has a programmable number of speed levels (as-delivered condition = 5 speed levels).
• The speed level is increased by briefly pressing the [Mode] button.
• Once the highest speed level has been reached the speed skips back to level 1.
• The LCD screen indicates the selected speed level in the
Driving
menu.
Display Information
Selected speed level = 1 (left: battery charge level)
• The selected speed level is shown on the bottom left of the separate LCD monitor.
Display Information
Selected speed level = 2
8.8.5 Driving
WARNING
Driving on slopes, over obstacles
Risk of falling or tipping over due to operator error
► Only cross obstacles or negotiate inclines or downgrades that are within the permitted maximums (see the
section "Technical data").
► Do not cross over any obstacles while driving on inclines or downgrades.
►
Avoid getting into or out of the wheelchair on inclines and slopes.
► Do not drive over stairs.
WARNING
Driving on unsuitable surfaces
Risk of falling or tipping over due to operator error
► Do not operate the power wheelchair on very smooth surfaces (e.g. icy surfaces) or very rough surfaces
(e.g. gravel or rubble).
WARNING
Longer braking distance
Risk of falling, tipping over or collision due to operator error
►
Note that the braking distance is much longer on downgrades than on the level.
► Also reduce speed when driving downhill (e.g. select speed level 1).
INFORMATION
The control unit of the product switches to a safe mode at elevated temperatures and after driving uphill for exten­
ded periods of time, limiting the performance of the product.
The user is able to drive the product out of a hazardous situation at any time. The product is fully functional again
once the unit has cooled down sufficiently (this may take several minutes depending on the ambient temperature).
The power wheelchair is controlled by moving the joystick:
Ottobock | 31 C2000
Use