Otto Bock C-Leg 3C98-3, Инструкция по эксплуатации

Страница: 61 / 280

Ottobock | 61
→
If Bluetooth is switched on, the symbol appears on the screen.
8.5 Querying the prosthesis status
8.5.1 Query status through cockpit app
1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "
Status
".
8.5.2 Status display in the cockpit app
Menu option Description Possible actions
Trip: 1747 Daily step counter Reset the counter by tapping
the "
Reset
" button.
Step: 1747 Total step counter For informational purposes
only
Batt.: 68 Current prosthesis charge
level, as a percentage For informational purposes
only
8.5.3 Status information on the display of the remote control (optional accessory)
Menu option Description Possible actions
Trip:1747 Daily step counter Reset the counter by using the
key to confirm the menu
option
Step:1747 Total step counter For informational purposes
only
Batt.:68 Current prosthesis charge
level, as a percentage For informational purposes
only
Bluetooth: On Switch Bluetooth function of
the prosthesis on or off The Bluetooth function of the
prosthesis can be turned on or
off (see Page 60) by confirm­
ing the menu item with the
key.
9 Additional operating states (modes)
9.1 Empty battery mode
Beeps and vibration signals are emitted if the available battery charge level is 0% (see Page 66).
During this time, damping settings are set to their safety mode values. The prosthesis is then
switched off. You can switch back to basic mode (mode 1) from empty battery mode by charging
the product.
9.2 Mode for charging the prosthesis
The product is non-functional during charging.
The product is set to safety mode damping. This may be low or high depending on the setting in
the adjustment software.
9.3 Safety mode
The product automatically switches to safety mode if a critical system fault occurs (e.g. failure of a
sensor signal). Safety mode remains in effect until the error has been rectified.
Default damping values are activated in safety mode. This makes limited walking possible for the
user even though the system is not active.
The switch to safety mode is indicated by beeps and vibration signals immediately prior to switch­
ing (see Page 66).