14
encoding protocol, resolution and
bit rate with the host panel menu
knob or Web;
【
1
】
Connect to the
wireless 4G network card through
RJ45 gigabit network port or
USB3.0, and the multi-screen
display of "NET:Internet" or
"NET:Internet (4G)" indicates that
the current push stream network is
connected.
【
2
】
Start push stream: select the corresponding
push stream address by the "knob"
and press the [STM] button, and
the key light changes from flashing
to long bright (about 8s) to
indicate the success of push
stream. At this time, the timing of
multi-screen
output
LIVE
broadcast begins, changing from
"LIVE: --" to "LIVE: 00:00:01".
【
3
】【
4
】
Stop pushing: Press [STM] button; When the
button lamp is off, the multi-screen
timing is over, indicating the end of
live streaming.
Status:
Button selected to light yellow, disabled not lit.
Description:
1.
The system can set up a maximum of 24 preset addresses.
2.
The system supports two ways of networking, through RJ45 gigabit
network port: "NET:Internet" and USB3.0 access wireless 4G network
card: "NET:Internet (4G)".
3.
If the key light flashes consistently or flashes until it goes off, please
