13
the button light will light up to
indicate the start of recording and
display the recording duration in
multiple screens.
【
3
】
Stop recording: Press the [REC] button again
to display the recording duration
font in multiple screens. Remove
the usb flash disk after it turns
white.
【
4
】
Status:
Button selected to light yellow, disabled not lit
Description 1.
Usb2.0/3.0 only recognizes the first partition by default. Do not insert
multiple U disks. Usb flash disk supports formats FAT32, NTSF, EXFAT;To
ensure that the recording is effective, please ensure that the usb flash
disk memory >1GB.
2.
The default recording bit rate of the system is 500kbps (about
279.6min/GB). The maximum recording bit rate is 40960kbps(about
3.4min/GB).The system will display the recordable duration according
to the storage rate set by the user with the precision of hours.
3.
The recording duration is displayed in red, and the recording file is
saved in the folder "Save" on the U disk.The default recording format of
the system is MP4, 10min/ clip.
4.
The system's default U disk storage <300M automatically stops
recording.
STM: [Direct Stream output button]
Here is:
STM
推流
Function:
Controls whether to output a live stream.
Use:
Push flow setting: Set the push flow name and
push flow address on Web [IP Flow
Setting], and select the required
