18
CUT: [quick CUT transfer button] Click and the PVW signal is directly output to PGM.
Here is:
CUT
Function:
Output the PVW signal directly to PGM.
Use:
Select the PVW channel that needs to be switched to PGM output, click
[CUT], and the screen will be output to PGM in quick CUT mode.
Status:
The button is not lit when used or disabled.
Description: Channel no signal or the same channel cannot be switched.
VOL: PGM output audio level adjustment slider.
Here is:
+10
0
-10
-20
-40
-
Function:
Adjust the volume of PGM output audio.
Use:
Push the slider upward to increase the volume of PGM output audio;
【
1
】
Push the slider down and the PGM output audio volume decreases.
【
2
】
Description:
１
.
By default, the audio adjustment slider is located at -
∞
(bottom end,
PGM has no audio output), and the output level of L and R channels is
the same.
２
.
Adjustments can be monitored by connecting to a jack on the back of
the unit or by a level meter displayed on multiple screens.
３
.
-20 is standard original audio.
[Special effect putter]
Here is:
Function:
Output the PVW channel signal to PGM as configured
Use:
Select the PVW screen that needs to be switched to PGM output, and push
the slider upward. The PVW screen is output to PGM in the way of
configuring special effects. Push the slider down and the PVW screen
retreats to the PVW by configuring the effects.
