2.4
Connecting AURICAL OTOcam 300
1. Connect the USB cable of AURICAL OTOcam 300 to one of the computer’s USB ports.
AURICAL OTOcam 300 is powered through the USB connection to the PC.
If you are using AURICAL OTOcam 300 in connection with AURICAL Aud, you can alternatively connect AURICAL
OTOcam 300 to one of the USB connections on the rear of AURICAL Aud.
2. Launch OTOsuite and select the OTOsuite Video Otoscopy module.
AURICAL OTOcam 300 is automatically connected to the OTOsuite Video Otoscopy module.
2.5
Switching AURICAL OTOcam 300 on and off
Switching on AURICAL OTOcam 300
1. Start up the computer.
2. Connect the USB cable of AURICAL OTOcam 300 to one of the computer’s USB ports.
3. Launch OTOsuite and select the
Video Otoscopy
module.
–
If OTOcam 300 is not placed in its cradle, the light beam is switched on.
–
If OTOcam 300 is placed in its cradle, the light beam is not switched on.
8
Otometrics - AURICAL OTOcam 300
2 Unpacking and Installing