Otodynamics Otocheck ABR Скачать руководство пользователя страница 9

Страница: 9 / 152

Otocheck ABR

User Manual

Introduction

If contamination occurs the coupler tubes must be replaced (see

15.2

Changing probe coupler tubes

Visually inspect the coupler tubes before use. A blocked sound delivery

tube may prevent the Otocheck from achieving its target stimulation

level and so prevent testing. A blocked microphone tube will prevent

the Otocheck from sensing the stimulus level in the ear. As a result the

Otocheck may apply a louder than normal sound to the ear.

All surfaces of the Otocheck may be cleaned with an alcohol based wipe or

cloth with antiseptic fluid. Dry the device immediately with tissue.

Do not allow liquid to enter the instrument.

If additional hygienic protection is required, clear plastic infection control

sleeves designed to contain the Otocheck during use are available from

Otodynamics.

Содержание Otocheck ABR

























































































































































Результаты поиска

Содержание Otocheck ABR

Отзывы:

Otodynamics Otocheck ABR, Руководство пользователя, Страница: 9 / 152

Результаты поиска

Содержание Otocheck ABR

Отзывы: