Otodynamics Otocheck ABR Скачать руководство пользователя страница 114

Страница: 114 / 152

CHAPTER SIXTEEN

Care of the Otocheck ABR

114

Care of the Otoport

Before fitting each tip, ensure the sound tubes are carefully examined for

any sign of debris that may have entered them. Replace any part of the

probe ear piece as necessary. (See chapter

Probe

care

for details)

Ensure your hands are cleaned thoroughly between each patient tested.

Clean the Otocheck each day before a testing session, or according

to local requirements. Ensure the Otocheck is cleaned if it becomes

contaminated. Clean surfaces of the Otocheck with an alcohol based

sterile wipe or cloth and antiseptic fluid. Dry the Otocheck with tissue

immediately afterwards. Do not allow liquid to enter the instrument and

do not immerse in fluid. Do not allow liquid to come into contact with the

connection sockets. Do no poke any materials into either the probe or

charger/pc cable sockets.

If additional hygienic protection is required, use the Otocheck in an

infection control sleeve. This can also be cleaned with a sterile wipe

or cloth with antiseptic fluid. The sleeves are disposable, so should be

replaced weekly or after approximately every 50 tests.

Содержание Otocheck ABR

























































































































































Результаты поиска

Содержание Otocheck ABR

Отзывы:

Otodynamics Otocheck ABR, Руководство пользователя, Страница: 114 / 152

Результаты поиска

Содержание Otocheck ABR

Отзывы: