Ossila T2006A, Руководство пользователя

Страница: 11 / 25

12
Note: The Ossila Cyclic Voltammetry software and SMU USB drivers can also be downloaded from
ossila.com/pages/software-drivers
8. Installation
1. Install the Ossila Cyclic Voltammetry software on your PC.
I. Run the file ‘Ossila-Cyclic-Voltammetry-Installer-vX-X-X-X.exe’ on the USB memory stick provided.
II. Follow the on-screen instructions to install the software.
2. Install the USB drivers on your PC.
I. On the USB memory stick provided, open the ‘SMU-Driver’ folder and run either ‘Windows
32-bit SMU Driver’ for 32-bit operating systems or ‘Windows 64-bit SMU Driver’ for 64-bit
operating systems.
II. Note, on Windows 10 the drivers will install automatically when the unit is connected.
III. If the drivers fail to install, please refer to the SMU USB Driver Installation Guide found on the
USB memory stick.
3. Connect the 24 V / 2 A DC power adaptor to the power socket on the rear of the unit.
4. Connect the unit to your PC using the provided USB-B cable.
I. If you are using a USB connection and the unit is not detected, please refer to the SMU USB
Driver Installation Guide found on the USB memory stick.
Figure 7.4. Ossila Cyclic Voltammetry PC software.